What does UL mean on a Whirlpool Cabrio Platinum washer?

Whirlpool Cabrio Washer Error UL. The Cabrio Washer UL error code stands for un-balanced or off-balanced load which means the control has recognized the the tub is off balance during the spin cycle.

Unbalanced load

Beside above, how do I reset my Whirlpool Cabrio Platinum washer? How To Reset Whirlpool Cabrio Washer:

  1. Turn the washer off.
  2. Set the mode selector dial to NORMAL.
  3. Turn the dial counter clockwise ONE click (LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then clockwise ONE click (RIGHT).
  4. Now press the start button.

why does my washing machine keeps unbalancing?

When a washing machine becomes unbalanced, it may start to vibrate excessively. The vibrations can quickly cause collateral damage, so it’s a problem that needs immediate attention. You can often fix the problem by redistributing the load — often a single heavy item in a light load can unbalance the drum.

What does Code F mean on a Cabrio washer?

The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.

How do you troubleshoot a Whirlpool Cabrio washer?

Clean all contact areas on the lid and the washer. Try unplugging the washer to allow the control panel to reset. Plug the washer back in and see if the problem resolves. Lid Lock Issues Press/hold for 3 seconds. Release for 3 seconds. Press/hold for 3 seconds. Release for 3 seconds. Press/hold for 3 seconds. Release.

How do you reset the error code on a Whirlpool Cabrio washer?

How to Reset a Whirlpool Cabrio Touch any key on the display pad to clear the error code, if applicable, or press “Pause/Cancel.” Choose a new cycle and press “Start” to begin. Turn off and disconnect the Cabrio if the error or problem persists. Wait several minutes before restoring power. Contact Whirlpool for assistance if the unit will not reset.

How do you calibrate a Whirlpool Cabrio washer?

CABRIO WASHER CALIBRATION CYCLE Pick three buttons ( Do not use Power button) and within 8 seconds. Make sure the washer is in (Stand By Mode) which means the machine is plugged in and all the indicator lights are off. Press and Release the 1st selected button, Press and Release the 2nd selected button,

Why does my Whirlpool Cabrio Washer not spin?

If your washer doesn’t spin or pump water out but the motor is running, your washer probably has a frozen pump pulley. If so, you need to replace the pump. To check the pulley, remove the pump from the washer and try to rotate the pulley manually. The problem turned out to be a shorted out water inlet valve.

How do you balance a washing machine?

Leveling the Washer Place a level so it points from left to right across the top of your washer. Loosen the locknuts on the washer legs by turning them counterclockwise with an adjustable wrench. The lock nuts are located on the legs and against the bottom of the washer cabinet above the feet.

What does OL mean on washing machine?

Posted: 02/02/2016. First, OL stands for “Overload”, so in other words, the washer thinks the tub is too hard to move because it’s overloaded and the motor is struggling or the unit is way out of balance causing the washer to struggle. The most common problem is a nut below the inner tub that needs to “float”.

How do you rebalance a top loading washing machine?

If your washer is located on a pedestal, the problem can be amplified. Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.

Why does my washer keep saying UE?

Your appliance will display a UE code when it has detected an unbalanced load and has stopped the spin for safety reasons. With any washing machine, it is vital to ensure that the load is evenly balanced when using a spin cycle. Redistribute washing by adding or removing items to ensure a more balanced load.

Why does my top loading washing machine shake violently?

Possible Cause: Unbalanced Washer If the washing machine is not balanced, it may shake violently during the spin cycle, causing water to spill on the floor. Redistributing the load will usually solve this issue if the cause is due to too many clothes on one side of the unit.