What is the difference between fan on and circulate?

When the heat is on, the fan will only turn on as your home heats up. When cooling, the fan will only run while your air conditioner is running. Some thermostats now offer a “Circulate” setting that will turn your fan on for a set period of time to help in circulating the air.

Most new thermostats have a “circulate” option that allows you to set the fan to run a certain amount of time per hour. This evens out hot and cold spots, uses your high-efficiency filtration or UV system more effectively, and keeps energy usage from going through the roof.

Subsequently, question is, should I leave my AC fan on circulate? Setting Your HVAC Fan to “ON” Pros to Keeping Fan Continuously Running: Less frequent starts and stops of the fan can reduce the stress from startup, and potentially help extend it’s lifespan. Leaving the fan on 24/7 ensures cleaner air, as the air is pulled through the filtration or UV light system.

Consequently, what is fan circulate?

Use a circulation fan to circulate outside cool air into a home instead of running the A/C compressor, particularly in dry, mild climates. Therefore, the fan can keep the house cool, pull in more fresh air and save money on energy bills.

How do you use a circulation fan?

The circulating fan feature allows the fan to circulate air when the system is not running.

  1. Press Menu.
  2. Press Advanced Set Up.
  3. Press Fan Mode Options.
  4. Toggle Circulating Fan On, and set the percentage you’d like the fan to run each hour.
  5. Press the back arrow until you’re back to the main menu.

Should I use auto or circulate?

The fan setting on your thermostat controls your HVAC’s system blower. The blower helps circulate hot or cold air throughout your home until the temperature on the thermostat is reached. AUTO means that the fan turns on automatically only when your system is heating or cooling air.

Should AC be on auto or on?

The difference between “On” and “Auto” The fan is located in the inside unit and helps distribute the conditioned air throughout your home. “Auto” means that the fan automatically works ONLY when the air is being heated or cooled. “On” means the fan is on 24/7, even when the air isn’t being heated or cooled.

Does fan circulate air?

A ceiling fan helps circulate air in the room, which helps reduce the sensation of cold or hot spots. Run the normal direction, a ceiling fan also creates a direct cooling effect by creating a breeze.

What is Auto mode in AC?

Auto mode means the fan turns on automatically only when your system is heating or cooling your air. The air conditioner will automatically set the temperature and fan speed depending on the room temperature. In Cool mode, the air conditioner will cool your room.

What is the fan on an air conditioner for?

The fan setting controls your AC’s blower; A fan inside your system that helps distribute air throughout your home. AUTO means the fan turns on “automatically” ONLY when your system is heating or cooling your air. When the thermostat reaches your temperature setting, the system, including the blower fan, shuts off.

Is it OK to run HVAC fan continuously?

When you run the fan continuously, it causes the water to evaporate and puts it right back into your home. This means your home will not be effectively dehumidified, which makes it less comfortable. So, putting the fan in the “on” position compounds the error of having an oversized cooling system.

How often should AC run?

An Air Conditioner Should Run for 15-20 Minutes at a Time. In a perfect situation, an air conditioner should run for 15-20 minutes at a time in mild temperatures. Any less than that and your AC could be too large for your home – more on that below.

Does AC fan bring in outside air?

In short, no. Though in split system air conditioners design, commonly heat pumps, part of your system is located outside your home, it does not take in outside air. Its main operational purpose of cooling the air in your home is not achieved by moving cool air inside, but by moving unwanted heat out.

Does running your AC fan save money?

A typical AC fan motor uses about 500 watts when it’s running. Therefore, if you run the fan continuously for a 30-day month (720 hours), you would use 360,000 watt hours (720 x 500) or 360 kilowatt hours (kWh). Bottom line – If you run the fan in AUTO mode, you’ll save about $300 per year.

What does Honeywell CIRC mean?

The FAN selection key has two or three positions: Auto and On and sometimes Circ (Circulate). The Circ (Circulate) position if available will run the fan approximately 35% of the time, minus any time the fan will run with the heating or cooling system.

Does running the fan on my air conditioner reduce humidity?

Because the fan blows constantly, most of the moistures evaporates and gets blown right back into your house! So, quick recap: The AUTO setting lets your AC properly dehumidify your home by stripping the air of moisture and pushing that moisture outdoors.

What is an air circulator?

Air circulators are air movers that circulate the air evenly throughout the enclosed space. Air circulators contribute to air ventilation by keeping the air in motion, whereas the traditional fan helps to cool you down when you’re directly facing it.

When should I use my HVAC fan?

Here’s when to use your HVAC fan setting: Run the Fan When You’re Not Home. You don’t want to waste energy when you’re out of the house. Filter the Air During Allergy Season. Any time you notice a runny nose, a dry throat or a persistent cough, it could point to your allergies. Share the Love.

Does running furnace fan cool house?

Running the fan continuously does have several benefits. Continuous fan operation will constantly recirculate the air throughout the house which will help even out temperatures from room to room or floor to floor. In multi-story houses or town homes, hot air can rise up the stairs and overheat the upper floors.