Why does my ecobee says calibrating?

The “Calibrating: Heating and Cooling Disabled” message on your ecobee’s screen is displayed after the thermostat boots up. Calibration is needed for the ecobee’s temperature sensor to get an accurate reading of your home’s temperature. In these cases, the thermostat will often reboot on a call for heating or cooling.

To Configure Temperature Correction

  1. Press Menu on the main screen.
  2. Go to Settings.
  3. Then go to Installation Settings.
  4. Select Thresholds.
  5. Then select Temperature Correction.
  6. Adjust the temperature reading to fit your needs.

why does my ecobee keep restarting? If your ecobee thermostat is frequently rebooting, your HVAC system may be cutting power the thermostat. The most common causes of your HVAC system cutting power to your thermostat are: If your furnace overheats, this sensor will trip, causing the furnace to cut power to your thermostat.

Thereof, how long does ecobee3 take to calibrate?

5 to 20 minutes

How accurate is ecobee temperature?

How accurate is the temperature sensor in the ecobee? The ecobee temperature sensor has a +/- 1.0F accuracy and is programmed to provide readings every 15 seconds. It will use the previous two values and average them into the current reading.

How do I reset my Ecobee thermostat?

You can reboot the Smart Si thermostat by pressing the physical hardware reset button, located through an opening in the bottom left corner of the Smart Si thermostat. Rebooting will not alter programming or configuration options.

How do I reset my ecobee?

1 Factory Reset From the Home screen, press Menu. Select Settings. Go to Reset. Choose Reset All Settings then confirm your selection by pressing Yes. Choose the reset option that suits your needs: The ecobee thermostat will be reset to factory defaults.

What is Auto setting on ecobee?

Auto mode on your ecobee thermostat is great for maintaining a comfortable home temperature in milder climates or in-between heating and cooling seasons. While on this system mode, the ecobee will display two set points—one for heating and one for cooling.

How long do ecobee sensors stay occupied?

Occupancy is measured roughly every 5 minutes, so the ecobee will not immediately go into Smart Home or Smart Away mode until the next 5 minute interval has been reached.

How do ecobee sensors work?

ecobee room sensors are an additional accessory that you can pair with your ecobee smart thermostat which allows the thermostat to know the temperature of different rooms in your house. Not only do the room sensors detect temperature, but they also have motion sensors so it can tell when somebody is in that room.

How does ecobee measure humidity?

Relative humidity measures how much moisture there is in the surrounding air. You can use humidifiers/dehumidifiers to maintain a comfortable level of indoor humidity. Additionally, you can also take advantage of ecobee thermostat’s smart features such as Optimal Humidity and AC Overcool to Dehumidify.

How do I turn off ecobee?

To remove the ecobee backplate, carefully remove your thermostat from the backplate by putting your thumb and index finger on the backplate. Then, pull against the ecobee3 lite. Remove the screws from the backplate to remove it from the wall.

Why is my ecobee not following schedule?

Click Settings > Preferences > Hold Action, then choose Until the next scheduled activity. Now close the Settings window. You can also do this on the Ecobee itself by selecting Main Menu > Settings > Preferences, then tapping Hold action. Set it to Until next activity and you’re done!

Can you lock Ecobee thermostat?

If you have kids in the house and are strict about the thermostat, you can lock down your Ecobee with a PIN code so that no one can adjust the temperature except those authorized to do so. With a non-smart thermostat, you’d usually have to get a locked enclosure to put around it, like you see in most businesses.

How do I turn on my Ecobee thermostat?

Open the panel on your furnace to expose the control panel where your thermostat wires are connected. Most systems have a purple 3 or an orange 5 amp fuse on the board—check this fuse to ensure that it’s intact. A blown fuse will have to be replaced. Once a blown fuse is replaced, the ecobee should power back on.

What is fan run time on ecobee?

2. Fan minimum on time. This feature allows you to define the minimum amount of time each hour that the system fan will run. This feature is useful if you wish to circulate the air throughout your home automatically outside of heating or cooling cycles.

Why does my ecobee flash green?

My ecobee is flashing a green light! What do I do? This is Alexa letting you know that you have a notification. To check your notification and/or get rid of the flashing green light, just say “Alexa, what did I miss?” or “Alexa, delete all of my notifications” to your ecobee thermostat.

Can ecobee3 control humidity?

Multiple Options For Humidity Control The ecobee also has a humidity sensor within the base. If you have a whole house humidifier or dehumidifier, it can be controlled by this thermostat. However, there is only room to connect one accessory so you can only choose one.