How do I change the code on my vivint door lock?

Remount and power up your panel

Walk-through for calibrating the deadbolt:

  1. Slide the back plate up off of the back of the deadbolt.
  2. Remove the battery pack.
  3. Wait for 10 seconds.
  4. Press and hold the Lock button on the deadbolt keypad.
  5. Replace the battery pack.
  6. There will be a loud beep.
  7. Release the Lock button once the deadbolt motor starts to initiate.

Secondly, how do I reset my Vivint control panel? Remount and power up your panel Line up the BOTTOM of the panel to the backplate and snap it back in place. Replace the top screw and plug the panel back into the wall. After 10-15 minutes, the panel should finish powering on.

Similarly, how do you change the code on a Kwikset door lock?

Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once. If your old code still remains in the unit, you will need to perform a hard reset of the unit.

What is the installer code for vivint?

Default installer code is 2203. Most of the 2GIG GoControl panel hacks (in vivint branded 2GIG GC panels you could remove cell and use default 2580 code to gain user code access, and view/change Master Code.

How do you enter a Weiser Lock code?

Note: Programming instructions can also be found on interior of lock. a. Press the program button on the interior unit once. b. Enter in 4 to 8 digit code onto the keypad. c. Press the “LOCK” button to save code. d. a. Press the program button on the interior unit twice. b. c. d.

How do you reset a smart door lock?

A factory reset will delete all codes associated with the lock. Make sure the door is open and unlocked. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep. Press and release the program button. You will hear one short beep.

How do you put a lock on a vivint door?

Tap the wrench icon. Enter your 4-digit PIN. Tap Add Devices. At this point, go to the device you want to add (door lock, thermostats, light module, etc.).

How much are vivint smart locks?

Minimum $49.99/month services agreement required. Minimum $599.99 equipment purchase may be financed subject to an agreement with one of Vivint’s financing partners.

What Smart Lock does vivint use?

With Vivint you can choose from several Kwikset Smart Locks, which allows function as either a deadbolt or a regular door handle. The Vivint alarm will sound after three incorrect attempts at entry. You can remotely control the smart locks or manually enter a PIN into the keypad.

How much is a vivint system?

Vivint sells a basic security plan for $29.99 a month. Vivint’s Smart Home plan, for $39.99 per month, provides 24/7 professional monitoring of home security components, remote access/control of the system via the Vivint app, 24/7 customer support (both phone and online) and in-home technician service.

Does vivint use Z Wave?

Vivint equipment compatibility overview Vivint is compatible with Amazon Alexa, Google Home, and Z-Wave devices like smart locks, thermostats, smart speakers, and smart outlets.

How do you reset a combination lock if you forgot the code?

Just reset the combination: Set the dial to 000. Turn the shackle at a 90 degree angle from the lock position. Push the shackle down (outside of the lock). Set the desired code. Pull the shackle up. Turn it back to the lock position.