How far off wall should toilet flange be?

Standard drywall is 1/2 inch thick, so the plumber should set the toilet flange at least 15-1/2 inches from the center of the flange to the wall framing. The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing.

There are two main ways in which the closet flange is typically installed: above the floor or flush (level) with the floor. At SUPPLY.com, our PROs typically prefer the first way; we’d like to give an overview of both so that you can decide which way is best for your particular bathroom situation.

Also, are all toilets the same distance from the wall? Start by measuring from the wall behind the toilet to the center of the bolts at the base of the toilet. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.

Keeping this in view, what is toilet rough in distance?

The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.

How far should a soil pipe be from the wall?

the soil pipe for the toilet comes up through the floor and is approx 8 inches from the external wall.

Should toilet flange sit on top of tile?

5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.

Should I caulk around toilet flange?

Some people prefer to caulk all around the toilet and leave about a one-inch gap in the caulk at the back of the toilet to allow water to escape out in the event of a leak. It’s already tough enough to caulk behind a toilet, so if this is what you want to do, God bless. Just don’t go crazy with the caulk.

Are toilet flanges glued in?

If the pipe has a 4-inch inside diameter This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. If it isn’t, then you will have to cut away the old flange. If the plastic pipe has a 3-inch inside diameter, you’ll have to remove the old flange from the outside of the pipe.

What if toilet flange is too high?

When your toilet flange is too high, your toilet may leak water and rock back and forth when used. Both the leaking and the rocking can warp or break the floor. A leaking flange can also rot the subfloor and lead to the accumulation of mildew and mold.

Can you install a toilet without a flange?

2 Answers. The flange and accompanying bolts hold the toilet firmly to the floor and keeps the seal between the toilet and the floor. Without the flange or if it is broken, he would have to attach the toilet to the subfloor with wood screws, and if the floor is rotting out, those won’t last long.

How do I know the rough in size of my toilet?

To find out your toilet’s rough-in, measure from the wall behind the toilet to the middle of the closet bolts, which hold your toilet to the floor. That distance will likely be a bit more than the standard 10″, 12″, or 14″ rough-in dimensions. Round your measurement down to the nearest standard rough-in.

Should a toilet tank touch the wall?

No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary. Yours is quite normal.

What is the difference between a 10 and 12 rough in toilet?

Those numbers are a measure of the distance between the wall and the center of the closet flange (aka, where the johnny bolts that secure the toilet bowl go). Most toilet bowls will work with either a 10″ or a 12″ distance, but a 10″ rough tank is slimmer to allow for the decreased distance.

What is the rough in height for a bathroom sink?

Rough-in plumbing is usually placed at a somewhat lower height, between 18 and 20 inches, to accommodate varying counter heights and sink depths and leave plenty of space for the P-trap and necessary connections.

How far above the floor should a toilet flange be?

With the toilet removed, you can see the toilet flange and measure its height above the floor. Optimum flange height to aim for is 1/4 inch above the finished floor.